Wastewater Treatment with FFC
Whether you are looking for a highly effective and efficient treatment of organic or chemical wastewater – or perhaps a mixture of both – you can rely on FFC to do our utmost to assist you with your specific challenge. We stock a full range of high quality products designed to optimize every step of the treatment processes. This will safeguard the environment when your wastewater is released.
Our range of sewage pumps are capable of efficiently handling all kinds of wastewater quality, including grease, grit, and particles of varying sizes. By tailoring the motor size and impeller type to your individual needs, the system can easily comply with your requirements. Pumps too, can be equipped with a control and measurement system, which will maintain consistency in quality of the water throughout the treatment process.
FFC has an unmatched disinfection system.
When it comes to disinfection chemical dosing FF’s systems ensure highly cost-effective operation since there is no wastage that occurs through overdosing when using expensive chemicals. Of course we offer proven mechanical dosing pumps too. Measurement and control solutions can be tailored to meet specific needs throughout the wastewater treatment process. Flocculation, neutralisation and the activated carbon steps are also fields in which we can offer you our expertise.
Transporting wastewater is a complicated affair that requires a wide range of pumps to keep the wastewater flowing in an environment of constantly changing pressure. Depending on topography and local regulation, a mix of gravity sewers and pressure sewerage systems may be required.
FFC are prepared for any situation, we have large-scale, individually tailored pumping stations to completely prefabricated submersible pumping stations. We can offer you large axial and mixed-flow pumps that are able to cope with shifting huge quantities of surface or storm water, at low head. As well as sewage grinder pumps for pressurised systems with small amounts of water and small lifting stations for transporting effluent away from buildings. In addition to this, FFC supplies complete control and monitoring solutions.
Our solutions are designed expressly for pumping installations and each component is fully integrated right from the beginning. The sustainability of wastewater transport over a long period of time requires that the pumping solution is hard-wearing, efficient and reliable.
Our in-depth knowledge of project design means that FFC can assure you of energy efficient solutions that will not compromise on dependability. We are able to keep your pumps running during replacement or refurbishment projects, with built-in minimal risk and maximum sustainability. We can do this for you at the design phase using Computational Fluid Dynamics (CFD) simulations and Life Cycle Cost analyses for entire pump systems, and pump audits for energy optimisation.
FFC Industries is a leading industrial design and manufacturing company dedicated to creating the most reliable, robust and energy efficient products possible to protect the environment from unnecessary carbon emissions. In addition to this, we ensure that our clients get the best value possible for their development projects, no matter how big or small. Specializing in fluid dynamics, our pump designs are among the most efficient in the world. FFC Industries Ltd is registered in London, England. Our global operations include Europe, North America, South East Asia, and we will soon be expanding to Kuala Lumpur, Malaysia and Canada.
FFC has vast experience developing controller and monitoring systems for pumping solutions. We supply pump motors for all fluid types and flow requirements. This ensures a perfect match with hydraulics, motors, electrics, and all other mechanical components that make up a comprehensive pumping solution, ensuring the best possible efficiency.
The super-efficient motors developed by FFC combined with dedicated variable speed drives will meet and sometimes even exceed the standards set by motor-efficiency legislation around the world. If you consider that approximately 85% of a normal pump system’s Life Cycle Cost (LCC) comes from energy costs, switching to high-efficiency motor technology can mean a LCC reduction of up to 50% and less of an impact on the environment. Control and monitoring systems boost the potential for improving both efficiency and consistency. FFC supplies external variable speed drives, Dedicated Controls and internet-based supervision (Remote Management) that are fully integrated into a pumping system. Dedicated Controls give you the ability to control pump functionalities such as energy optimisation and anti-blocking with an easy-to-use SCADA interface. FFC monitoring and control systems include plug-and-play communication interfaces that integrate with 95% of the communication standards available on the market.
The first step in any water supply system is to find treatable water. Whether your source is groundwater, surface water from rivers and lakes, desalination of seawater or recycled, treated water, we can assist you with total pumping solutions of any size and scale. We can offer you efficient products such as submersibles to end-suction pumps and huge split-case axial flow pumps.
In order to draw water from a source, and ensure sustainability, the pumping solution must be cost effective, reliable and offer energy optimization. FFC has decades of experience developing controller and monitoring systems for pumping solutions and we can provide you with pump motors for all fluid types and flow requirements.
External frequency converters (CUE) for variable speed drives and motor protection (MP204) to monitor motor conditions ensure optimal adaptation to changing conditions. This ensures a perfect match with hydraulics, motors, electrics, and all other mechanical components that make up a comprehensive pumping solution, ensuring the highest efficiency.
FFC will continue to be at the forefront in offering you energy efficiency and sustainable technology. It is our innovation that will enable water supply infrastructure to meet future challenges and regulations. The high-efficiency motors developed by FFC, with or without an integrated or external variable frequency drive, meet and in some cases exceed the requirements set by motor-efficiency legislation around the world. If you consider that approximately 85% of a normal pump system’s Life Cycle Cost (LCC) comes from energy costs, switching to high-efficiency motor technology can mean a LCC reduction of up to 50% and less of an impact on the environment.
FFC solutions are designed specifically for utility installations and all of our components are fully integrated. FFC can promise you that we will assist you to bring water to life in a manner that is financially and environmentally sustainable. Our insight can be applied to addressing the key issues of safeguarding water resources, meeting consumer needs and ensuring cost-effective infrastructure.